top of page


Industrial weight indicator i 40 EDU

The i 40 EDU ( Elementary dosing unit ) is an industrial weight indicator specially designed for basic batching processes. It can be operated in stand-alone mode or monitored by a supervisor.
In this latter case, it offers numerous connection possibilities with most PLCs and industrial PCs currently on the market.
With various types of housing, it can be installed directly in the work environment, in a cabinet or in a monitoring console.


  • Dosing in gross or net weight loading or discharging

  • Monitoring of actuator in 2 speeds (coarse feed/dribble feed)

  • Automatic acknowledgement of in-flight error

  • Tolerance check on the dosed product

  • Discharge cycle (if loading) and feeding of buffer hopper (if unloading


Display on indicator of number of doses performed, with min. and max., total weight, average weight and standard deviation


Weight indicator i40 BS (continuous weighing)

The i40 BS weight indicator is designed to measure the flow rates of any bulk product, without capacity limit. It integrates a weight measuring card and an acquisition card of the belt or screw conveyor speed.
Different housing versions allow installing the indicator on a table top, a panel mounting or a DIN rail mounting.

It has a backlit display unit allowing displaying the following selectable information:

  • On the 7-segment 25 mm high main line:

– flow rate with selectable measuring unit: kg/h, kg/s, t/h or lb/h.

– weight per meter with selectable measuring unit: kg/m or lb/m.

– belt speed with selectable measuring unit: m/s, m/min, ft/s or rpm.

  • The overall or partial summation with selectable measuring unit on the 10-segment 8mm high secondary line: kg, t or lb.

When necessary, this second line alternately displays the summation and a message depending on the operation in progress. The i40 BS weight indicator can also favorably replace some existing electronics.


Weight indicator for industrial processes i 40

Weight indicator i 40 is particularly adapted to process weighing as it easily fits into any industrial process that implies with measurement.
The various connection possibilities offer a direct link with the i 40 for most PLC and industrial market PCs.
With different types of housing, the indicator can be installed directly into the work environment, into a cabinet or a monitoring termina

  • FSC (Field Sequential Color) segment technology

  • Configurable 7-colour backlighting

  • Weight display on seven 25-mm characters

  • Text area with ten 8-mm characters

  • Weight unit: g, kg, t et lb

  • Light indicators for metrology and field bus operation

  • High angle of vision and contrast

  • French/English messages

i40 EDU
i40 BS
bottom of page